Hot Rod Forum banner
blower
1-13 of 14 Results
  1. Engine
    I have a 509 casting 400 small block, with a moderate boost cam looking to upgrade from 882 heads, I'm running 5 pounds of boost with a 177 blower at the moment but plan to up to 8-9 pounds in the future along with a forged rotating assembly. I'm looking at purchasing some blue print...
  2. Engine
    Hi Guys, I am new the blower/supercharger world and have a question that maybe very basic. I am rebuilding a sbc 350 /5.7 adding a Edlebrok 122 Supercharger. Can someone confirm I would need to use the stock pulley wheel in conjunction with the blower pulley in order to include my alternator/...
  3. Engine
    Hi guys, first post here. I have a mark 6 454 bbc laying around in the garage and had an idea of maybe running forced induction (turbo or roots blower havent decided) around 8psi on it but the heads have really small exhaust ports and recessed chambers it has flat top pistons which ill swap for...
  4. Engine
    (newbie to blower motors )could anyone give any advice on removing snout on a 6-71 weiand blower because of an oil leak at the snout. Do you just undo the fist round section ( with alen heads ) or the next section aswell . or even links to somewhere that shows disassemly ?? ANY help will be...
  5. Engine
    Hi guy's. I need help understanding what effect my 8/71 Weiand blower will have on the transmission/converter I choose. It's a 496 BBC, mild street cam (226/218 @.050, 524/517 lift), just for street fun, 5 lbs. boost. 3.50:1 gears. I'm looking a the TCI Streetfighter trans/converter combo or...
  6. Engine
    I would like to fit a weiand 671 or 871 to a 6L chevy, which would work best, at what comp ratio and which one whiles the best?
  7. Engine
    Hi all! Well its been a while since ive been on here, what with moving to the UK n getting set back up! But im not really a computer wiz so here gos!... Ive just brought what i was told to be a good 671 blower... Now after donkey's years working with blowers... Top fuel dragsters etc ive really...
  8. Hotrodding Basics
    need advise on testing msd btm with pump Im going to the track this weekend for the first time and running only 5# of boost on the 427bbc with 8-71. Here at home i cant get enough boost into the btm to show me that it works like it should when i got #5 pounds at wot. I can only get #2 of boost...
  9. Engine
    I have a 454 HO crate motor, fresh rebuild chrome moly rings with 24 thousand ring gap,10/71 with (2) HP 4150 carbs, comp cam blower cam, solid roller lifters, roller rocker, I have moroso evac system from the breathers run down into the headers. I am pushing my dip stick out and pushing oil...
  10. Engine
    Im new to building from the ground up , I purchased a 78 vette project I'm planing on turning it into a 383 with a 177 blower I was qurious of what anyone had to say about the kit I'm planing on purchasing here are the specs. As well as your thoughts on the blower I'm going with as a combo...
  11. Hotrodding Basics
    ok, now, my best friend passed away recently and in his garage i found a dyers street charger super charger. and i have no clue what kind of motor its for. can anyone tell me how to find this out?
  12. Engine
    i have a 468 cubic inch bbc with 6:71 blower going in a '55 chevy stepside. i was wondering if anyone could recommend any alternators. the smaller the better. I don't have much electronics i need to run, basically just lights. i've seen the shogun alternators which is really what i wanted but...
1-13 of 14 Results
Top