Hot Rod Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 33 Results
  1. Engine
    Hey there, recently I had the head on bank 1 of my Chevy 383 Stroker decide it no longer wanted to hold any oil in it. I've decided I don't wanna go through the laborous and cost-intensive process of casting or machining it to be where it used to be, and have instead decided I want to replace...
  2. Engine
    Will this intake work with these heads? (Once I install the gasket of course) It seems that I have a wrong intake, but I don't know of chevrolet big blocks using different intakes due to the egr port. Also, note that the intake does not have bolt holes between the intake runners. Seems that I...
  3. 1952 Chevy customized led sled

    Moncton, New Brunswick, Canada - July 8, 2016: Customized 1952 Chevrolet parked in the downtown district during 2016 Atlantic Nationals. Camera: Nikon D7100 & Nikkor 18-105mm lens ISO 500, 85mm, f/10, 1/125
  4. Fuel injection Engines
    Hello: Joined this forum because I saw other folks discussing TPS issues on the Quadrajet. The rig I’m working on is an 89 Chevy Caprice with the 305 engine. The code reader is reading 21: TPS voltage to high and 45: rich exhaust (makes sense) I have been consistently reading about 3.39 volts...
  5. Engine
    Hi all! I am going to rebuild my Chevy 350 and I need some advice. Hope you can help me! What do I have and/or want to re-use: 1) Stock Chevy 350 (4-bolt, 010 020 high nickel) from 1972. It's at the machine shop now to bore and hone (.020 or .030). 2) Stock crankshaft. Is polished and in good...
  6. Hotrodding Basics
    Hello Everyone. i have recently purchased a 63 Impala rolling chassis and have some pretty big questions for my new project car. now i have quite a few questions for this would be my first chevy project and my knowledge extends more in to the ford area. i have many years as a ford mechanic...
  7. Transmission - Rearend
    I headed for Reno, NV two weeks ago on business in my 1965 Chevelle. I built this car 20 years ago and cruise it weekly so I took the same route to Reno that I did last year. The 700r4 trans has always worked fine behind a Vortec-head 350 engine with cam, headers, 650 Holley carb. As I got...
  8. Introduce Yourself
    Hello everyone, i am new to this forum, i have been a gearhead my whole life but never tried the forum thing. now that i have taken my honbby from the novice category to the semi profesional stages i figure i should start documenting my toys. my car list goes on and on but here are some of my...
  9. Engine
    In the process of picking heads for a new 355 sbc with 10.5:1 compression, Comp cams High Energy 268h. I'm currently trying to decide between Edelbrock Performer RPM PN: 60735 or ATK PN: sbc70185. Any advice would be greatly appreciated.
  10. Engine
    Hi All, :welcome: I've made a big rookie mistake and need some assistance. About two years ago, I was working on a Chevy 350 engine, and left it exposed to the elements. No valve covers (for a while). No intake manifold. No radiator hoses. The hood was closed at all times. My neighbor...
  11. 31 Chevy 2dr Sedan (Coach) w BB

    Built this with a 468 BB paired up with a 700r4 automatic trans, Ford 9 inch rear end.
  12. 31 Chevy 2dr Sedan (Coach) w BB

    Have original trunk and aftermarket trunk for it.
  13. 31 Chevy 2dr Sedan (Coach) w BB

    Looking clean.
  14. Hot Rod Art
    Edited '68 Chevrolet. What if... Thanks for looking! ;) Can you guess what it was before editing?
  15. Hot Rod Art
    Here's a full-size '65 Chevy panel delivery truck edited into a lower profile version inspired by the popular solid panel Sedan Delivery vehicles. A sedan delivery, commonly called a delivery in American English and a car derived van in British English, is a two-door station wagon with driver...
  16. Hot Rod Art
    What if.. '57 Chevy Bel-Air 2-seater. Edited to similar wheelbase and body length as the T-Bird. Thanks for looking!! :)
  17. Engine
    I have a 1988 chevrolet 3500 with a 1978 350 small block in it with a 4 core big block radiator in it and am using a flex fan right now but it's running really hot in town. And when I took the water hose off only a gallon of water leaked out n it was completely full the other day
  18. Introduce Yourself
    Hi guys, I'm a Brit living in Saudi and I am the proud owner of a 1985 Chevvy Caprice Classic. I've had the car for a year and I intend to take it off the road and give it a new lease of life. I want to clean it up, degunge everything and make it look like new again. I'm going to give it a nice...
  19. Projects/Builds/My Ride
    I have a completely stock caprice classic its all original I have started doing minor things to it I also have a video on YouTube. If you all have any ideas plz look at the video and give me some feedback. Thanks!! Video of tour...
1-20 of 33 Results