Hot Rod Forum banner
clutch
1-4 of 4 Results
  1. Transmission - Rearend
    I have a 351W from a '94 F-150 that I'm going to put into a '67 Fairlane with a T-5. I just realized the block has no provision for the Z bar pivot. Were there no standard trannys in the F-150's that year? Or, were they cable or hydraulic actuated? I know there are cable/hydraulic...
  2. Transmission - Rearend
    I am rebuilding a 67 Camaro. mostly for street... mabie a little track....it has a zz3 350 crate motor. M22 trans and a Pontiac 8.2 posi Diff with 3.73 . the clutch is fading fast. it has a GM 14088646 fly wheel (10.5) i think... with a 10.4 plate and disk. i want to upgrade to a center force...
  3. Transmission - Rearend
    I am not running a Hydraulic set up, the question is for mechanical clutch linkage set up. I have a 1980 Z28 Camaro, the owner before me converted the car from (factory) manual to a Th400 Automatic. I recently purchased a T-10 4spd which came out of a 1972 Chevelle SS And i want to replace the...
  4. Transmission - Rearend
    98 k1500 4x4 350 with 4l60e Rebuilding using monster transmissions ss kit for the 4l60e 4L60e Low Reverse Clutch Seems to be to tight when I turn to clockwise it does turn but I would think that it would be more smooth. It does not turn counter-clockwise.. which i do know is correct. Can...
1-4 of 4 Results
Top