Hot Rod Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-2 of 2 Results
  1. Hotrodding Basics
    I'm building a 327 and have some good forged 350 Pistons with about a .125 dome. I'm using a 5.7 rod and know the piston will be in the hole but was hoping the dome will make up for it. The heads are 66cc chamber and have been milled a bit but don't know how much for sure. The block has been...
  2. Engine
    Alright so first here's the video that sparked my whole interest; 2 MINUTE TECH - Convert Your Carb for E85 | PowerBlockTV Network - Video Now here's my application; 460 with stock heads and bottom end, stock compression. It has a few other addons which may make a difference, it has a Holley 850...
1-2 of 2 Results