Hot Rod Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. Body - Exterior
    I need to get advice on how to repair body work that's 60 years old.( on a 1941 car ) The hood has been pancaked , fender seams have been filled in with lead too. What I have noticed that the under side of all seams need more support to prevent cracks from showing up. This is a custom rare car...
  2. General Rodding Tech
    Does anyone know a company that makes aluminum elbow radiator filler necks? I have a new aluminum radiator I just need to relocate the neck! (see photo) KK [email protected]
  3. Paint
    Hi all, New member here. I have a truck (daily driver) with failing paint (peeling in sheets.) Otherwise only a few door dings. I've decided to strip it and refinish with a b/c. I was planning to apply two coats of SPI epoxy primer. Fill the dings, spot prime them then reduce a little of...
  4. Body - Exterior
    Need information.. I have a 1989 dodge dully d-350. I removed all of the paint off to bare metal. I started to do the small bit of body work over the metal. Welded holes where the molding was etc. No Body work near 1/8” deep. I have sanded everything, Rage Gold & bare metal with p80. The body is...
1-4 of 4 Results