Hot Rod Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. Engine
    Its in a 68 Chevelle with a quadrajet carb. It runs rough under load. It starts fine and idles ok. Here is what I have done: -Changed plugs, wires, cap, rotor, coil -checked spark at all and getting spark at plugs -compression check 150 psi 150 psi 150 psi 150 psi 150 psi 150 psi 150...
  2. Engine
    There are so many questions....... - is it a cracked intake and bad rings that lead to the coolant getting into the cylinder? - could the oil cooler lines have cracked inside radiator? - block cracked? - head gasket gave out? I know i have a bad ring or 2 on my aluminum heads, the #8...
  3. Hotrodding Basics
    Curious if the following are symptoms of a bad head gasket, couldn't find anything that's an exact match so I figured I'd ask here. Small block 350 in a 78 C15 pickup is losing some coolant, albeit slowly, and I know where a lot, if not all of it is going. When I turn the heater on I smell...
1-4 of 4 Results