Hot Rod Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-2 of 2 Results
  1. Electrical
    Hello, all. Is it okay to use 16 gauge wire from power to the coil positive post? I see some recommend using 14 gauge for this wire, but I see no reason I shouldn’t be able to use 16 gauge. Any thoughts? Thanks in advance.
  2. Hotrodding Basics
    I have a 1987 Chevy k5 with a TBI 350, I installed a tachometer by using the hot wire located on the ignition coil. It works great at idle and only goes up to 1000rpm before it jumps to 3000rpm. So I thought it would just be 2000rpm off but when I floor it and it down shifts to a high rpm, it...
1-2 of 2 Results