Hot Rod Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. Transmission - Rearend
    Does anyone know what Ford automatic transmission will bolt up to a 300 inline six? (non FI ) :confused: [email protected]
  2. Engine
    how much hp would i get by adding long tube headers and a 4barl intake and hei on all stock block on a 1980 engine ..thanks
  3. Hotrodding Basics
    currently have the original 216 and 3 on the tree in my 1947 fleetmaster 4 door. was thinking of swappin it out for somethign with a little more grunt. i have a free 305 that needs a rebuild and would also require a diff tranny and rear end. then i get word to try an updated inline 6 (mount...
  4. Engine
    hey im rebuilding my inline 6 250 and im installing the crank main bearings and there is 2 holes in the bearing and neither match up to the hole in the block but there is a narrow slit through the bearing where the hole is visible is this ok or should i find other bearings or can i drill out...
  5. Hotrodding Basics
    well i drove the car today, and started ticking loud , i brought in the garage and adjusted the valves she quieten down nice , wait until i turned it off and guess what right back the ticking was there ,, i am ordering a set come mon , i think i have developed a knock now ,,( 1 thing after...
  6. Hotrodding Basics
    Hi All, I am researching Chevy in-line sixes and wanted to ask the forum members for recommendations on any books and other sources that provide good information on the history, rebuilding and power applications. I found a few websites and forums dedicated to in-line sixes with some decent...
1-6 of 6 Results