Hot Rod Forum banner
manual transmission
1-5 of 5 Results
  1. Engine
    I'm considering a Cadillac 472 for sale near me to put in to a project that I'm working on. Does anyone know if there are any manual transmissions that will bolt up to the 472? Or if there are any conversion kits? The project that I'm working on currently has a straight 6 and a non-syncro...
  2. Transmission - Rearend
    Hi all. I need some help to ID a Ford top loader Flathead manual trans for a friend, my buddy that I would call is no longer around on earth he in Flathead Heaven . Need idea of years trans was used and what kind it is. There is no numbers on the top bell-housing, but near the inside clutch rod...
  3. Transmission - Rearend
    So I actually have a 76 Omega, and am looking to convert it to a manual, if I can get out of it for pretty cheap. It is my first project car, and am not really looking to have to fabricate a taller/wider tunnel. So, I was wondering what trans I could throw in there, and have the factory tunnel...
  4. Transmission - Rearend
    Hello all, New to the forum. I am getting a parts list together for my latest project, a 32 ford 3 window street rod. It will be a daily driver for the most part, no show boat. I was thinking of fitting it out with a 302, but since this is my first Ford project, I need some help with a...
  5. Transmission - Rearend
    Ok this should be a quick one for all the Ford transmission Gurus that are on here. I have a 75 ford 300 inline six with the stock cast iron bell housing and stock three speed manual transmission that came with it. I am putting the engine in a T-bucket and I am not sure if I am going to use the...
1-5 of 5 Results
Top