Hot Rod Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Hotrodding Basics
    Hi I got a small block 350 in a 50 ford. I'm using the jamco motor mounts and oil pan kit (part code OPKSBC). The oil pump and pick up tube are screwed up. I was wondering if anyone else had a problem with this too and if a stock oil pump and pick up will work fine with this oil pan. Thanks
  2. General Rodding Tech
    Fact or Fiction, Gospel or Myth? The Small and Big block standard volume (stn vol.) hydraulic pumps are pretty much equal in cubic inch displacement per revolution (CIR) Ether pump could be installed in a small block and the horse power requirement to oil the motor would be the same assuming...
  3. Hotrodding Basics
    I am about to begin the build on this SBC 350 (+.060") shortblock and am trying to find a good oil pump. It has been suggested that I use a high volume, standard pressure pump by my uncle. I see Melling has a +10% and a +25% volume over OEM pump and these are the units I am considering. I...
1-5 of 5 Results