Hot Rod Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. Engine
    Hello all, hoping for some pointers on a strange issue with oiling. My brother just rebuilt the bottom end on a chevy 250 inline 6. Had the crank turned and plopped in undersized bearings the machine shop supplied for him. I had him check the clearance just to be sure and all checked out...
  2. Engine
    I picked up a used but rebuilt 390 recently, done .90 over with c3ae6090c heads, hv oil pump, performer intake, stock cam. After running it that way for a while without any problems, I installed a hydraulic roller cam that i had pulled out from my previous 390, so I know it worked well and I...
  3. Engine
    I'm laid up, recovering from Achilles tendon surgery and I'm thinking about an oiling issue I was dealing with before that happened. I know I need to do some diagnostics, but until I can walk I'm stuck bench wrenching. The motor is a 509 Gen VI BBC, Edelbrock RPM oval port heads, comp solid...
1-3 of 3 Results