Hot Rod Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 7 Results
  1. Electrical
    I'm new to electrical stuff and I came here to find help and answers. my fuel pump died on me so I replaced it and now there is no power going to the fuel pump. The car is a 1948 Chevy with a 396 big block in it. thanks in advance
  2. Electrical
    Hey guys, on my car I run a Mallory Magnetic Breakerless Distributor. Now my problem is the magnetic pickup keeps burning out on mine. The past two weeks have seen 2 replacements and these things are not cheap!!! Apart from that, I run an MSD 6a box and a Mallory coil. Symptoms from the last...
  3. Hotrodding Basics
    I have a 383 stroker and wondering what the power would be. from top to bottom. Holley 750, edelbrock performer eps intake, the corvette 882 heads with the large valves and port and polished and machined to I think 72cc chambers, the thinnest head gasket I think its .015, Bored 30 over with...
  4. Engine
    Me and my son are building a mild street car from a 84 vette. We removed the old 350 and replaced it with a 400/406, it starts rite up and idle a little rough and when I step on it it seems to lose power? Here is a list of all that he and I have done 400sbc .30 over Summit cam (part# sum-1065)...
  5. Engine
    I have a 383 in my K2500 that's using TPI right now. Originally, I was going to turbo it, but I ended up having to buy another vehicle bc my daily died (13k+ out of pocket cash gone T_T). So instead I want to just carb it, and change out the small compu cam. I have been reading a bit on this...
  6. Electrical
    Hey everyone got an annoying problem, I have a 1985 Chevy Silverado and my drivers side window one day decided to quit working but it did so with a pop. Now when I push the roll down it goes down about a centimeter and then the motor will just make a loud noise. Any help is appreciated.
  7. Hotrodding Basics
    I don't know hardly anything about nitrous but I'm interested in finding out ****. Suppose I wanted to put nitrous on my 1993, Chevrolet S10, standard transmission, v6 2.8 liter. What would I need to put a nitrous system on it?
1-7 of 7 Results