Hot Rod Forum banner


  1. PPG Omni Sanding between Basecoat and Clearcoat

    I am working on restoring an old pickup and attempting to paint it myself. So far doing filler work and priming has gone good. I am now down to basecoat and clear coat. I have read and watched several videos where some will sand between basecoat and clear as others will not. Appears sanding...
  2. Damn It! Wrong color!

    Hi all, New to the forum. Been painting with PPG Deltron 2000 and other PPGs for about 10 years. Painting a set of saddlebags to match the rest of the bike. Everything went really well, but, I had a few paint cans sitting on the counter and I used the wrong basecoat!!! Didn't bother to check...
  3. PPG epoxy failing

    I am a hot rod shop out of GA and have used PPG for over 30 years with no real problems till lately. The DP epoxy line that we have all used forever is failing me, before the LF or lead free label hit the can it would stick to plate glass around probably around 1998 after that it had to have...
  4. PPG DP Primer Suggestions

    I am getting ready to primer and paint my 1966 Mustang. I've decided to use PPG products for my paint and primer. Through my research it seems to be pretty unanimous that DP Primer is the best of the best and will stick to anything. I went to my local paint shop and was pricing out all of my...
  5. PPG Paint System question DPLF and 1k Primer / DBC Basecoat

    Body - Exterior
    Hi, I got setup at the autoboy supply shop with some PPG DPLF primer / DBC Base Coat and a speed clear. This is my first time painting and was following what to do as per the specs and what was told to me at the store.... Im painting a motorcycle frame and fiberglass tank and seat etc. I...