Hot Rod Forum banner

rack and pinion

  1. 1966 Mustang Rack and Pinion

    Suspension - Brakes - Steering
    I'm looking to convert my 1966 Mustang to a rack and pinion set up. Just doing some quick research there seems like there are a lot of different conversion kits out there. Does anyone have any insight on which one is the best? Also my mustang has a manual transmission with the factory clutch...
  2. Need to shorten rack & pinion 12".

    Suspension - Brakes - Steering
    Here is my latest purchase of a rack and pinion steering unit from a 1992 Dodge Dakota. It's going in a 1991 Chevy S10 frame. I need to take out a total of 12" from the overall width. The stock unit is 57" in width. The Chevy S10 measures 45" in width. Can I just cut out 6" on each inner tie rod...
  3. What is it? Rack and pinion

    Suspension - Brakes - Steering
    I just bought a 31 ford Rat Rod roller. it has a rack and pinon up front. ford 9" in the back.... it was put together about 5 to 10 years ago. i was told it came from Speedway motors but i can't find any thing that looks like it. the bolt pattern on the wheels are 5 on 4-1/2 .... ford...
  4. Where to put power steering pump??

    Engine
    1980 454 motor in a 1959 chevy pickup- I am converting it to power steering and running V belts not the serpentine. Alternator is on top passenger side right in front of the valve cover, a/c is up top on the drive side in front of the other valve cover, running a mech fuel pump and have the...
Top