Hot Rod Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. Engine
    Looking for some advice i was gifted a 400 sbc short block .20 over with flat tops. Also picked up a set of 993 heads that have been rebuilt with good springs would like to get 400hp from it any advice on cam choice intake and carb. the rest of the setup is turbo 350 trans and a ford 8.8 with...
  2. Hotrodding Basics
    good morning guys and gals. I have been along time reader here and have learn a lot of things. today I am stumped. me and my son are back on our (farther-son project) here is what we have so far sbc 400 .040 over dish pistons 291 heads (complete work over .was at the shop for ever) MSD ready to...
  3. Hotrodding Basics
    I am new to the site. I am looking for a cam and rocker recommendation for my 1955 Chevy 4 door driver. What I have thought about is a "Mild" cam, whatever that means technically. I want to run on pump gas and go to shows, no racing. I have a sbc 400, dish pistons, stock rods, Vortec heads...
  4. Engine
    I had a set of aluminum assault heads to me sbc 400 drilled for steam holes. I put them on and now coolant is seeping into my oil!!! When I drain my oil I can see a constant drip of coolant. What could've possibly happened?
1-4 of 4 Results