Hot Rod Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-2 of 2 Results
  1. Engine
    I’m putting together a gen 1 sbc 406 Afr 195 Eliminator heads Scat Rotating Assembly 9000 crank, forged rods forged piston dish -15.20cc icon I have been really indecisive on what brand cam and lifters to use. I feel like all I’m reading is about lifter failure and I really want to avoid...
  2. General Rodding Tech
    Hi I am needing a little validation on a SBC build. I tuning on an 88 S10, and have a steady 8" of vacuum at 950 -1050 rpm. The cam is fairly large solid flat tappet. The specs are below. I think I am OK, but would like some opinions. S10 weighs 3100 with driver SBC 406 = 9.81 compression -...
1-2 of 2 Results
Top