Hot Rod Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. Electrical
    Hello, I recently took down my gas tank to replace it and while i was at it i want to fix the gas gauge. currently it reads at 5/8 full when the float is all the way up. ive tested the sending unit ant it reads exactly at the specs 0=E 95=F OHMs. Ive tested the wire from the tank to the...
  2. Hotrodders' Lounge
    I'm trying to find a suitable alternate location for a temp sender in my 1986 Chevy K10. The original spot between 1 and 3 is blocked by the headers. So I'm wondering if i can use the port on top of the intake manifold. there are two pics attached. would this be an OK spot for a temp sending...
  3. Electrical
    I have a 1949 ford passenger car which has been converted to 12 volt before I got it. The fuel gauge was working fine until about a year ago. It suddenly stopped working and stayed on empty. So I got a Stewart Warner fuel gauge part number 82303. 2-1/16 Inch (52.40mm diameter) Elec Fuel Level...
1-3 of 3 Results