Hot Rod Forum banner

torque converter

  1. GM 700R4 Manual Torque Converter Lockout

    Transmission - Rearend
    So there's a few threads on how the wiring is on these or how to put a manual switch, but I couldn't find exactly what I was looking for. Everyone has 3 wire plugs and a vacuume sensor for the Lockout to engage/disengage blah blah blah. I'm running an 83 GMC originally k1500 with 6.2 and a 700r4...
  2. Choosing Converter: Shift kit / Stall / size / performance / economy etc

    Transmission - Rearend
    Hi there, eyes are burning from reading so many TC articles - and thought id get some advice from the pros here: I would like some recommendations for my setup and also have some basic questions regarding stall, economy, shift kits, etc.. Id like as much nominal performance as a daily driver...
  3. '69 C/10 Stalling Issues - TorqueConverter?

    Transmission - Rearend
    I've been working on a 1969 Chevy C/10 with a LG 250 engine and a THM350 automatic Trans. I'm having issues with it stalling out while driving. I can hit the gas and go, but when it gets to about 40-45 ish MPH, it starts dragging (almost feels like your downshifting) and will eventually stall if...
  4. Torque converter install

    Transmission - Rearend
    I have a 95 Nissan Pathfinder VG30E engine and am tying to do an engine swap , but problem is, I for the life-of-me can't get the torque converter back in the tranny far enough! Any tricks would be appreciated!:welcome:
  5. T-400 intermittent squeak rattle in park and drive

    Transmission - Rearend
    hello everybody. i posted a question before on hotrodders, and got some awesome help. so thankful for this site. i've got a new problem, this time with my transmission. (i think) I have an '85 chevy 3/4 ton 4x4. engine is a 402. tranny is a th400 that works great aside from being a little slow...
Top