Hot Rod Forum banner
tranny
1-11 of 11 Results
  1. Transmission - Rearend
    so where am i at i have a flywheel for a 96?ish dakota i got 3 different numbers tooth to tooth is 14.5 inches total surface is 13.5 inches (contact area just inside the teeth) and bolt holes gets between 11.5 inches and 12 inches its going on a 90 Dakota V6 that had an auto behind it previously...
  2. Transmission - Rearend
    Hello there, I have a 1955 Chevy 3100 step side pickup that is 100% all original. I am building a 327 motor for it. It will have 2.02 160 aluminum heads, a Holley 750 double pumper, a weiand dual plane intake, headers, and a nice mild can of sorts. Run at about a 5500-6000 redline. I want to...
  3. Transmission - Rearend
    Hi, i did some searching but couldn't find the info i'm looking for. I'm rebuilding my th350, putting a shift kit in it and a new converter (high stall speel), but i'm not quite sure what oil to use, some say type F will destroy any gm tranny, some say Mercon with any number will work fine, some...
  4. Transmission - Rearend
    Hello, again guys:welcome:. So in my earlier posts I have been wondering how to do things such as install headers and blah blah... But in this post I'm just going to ask "Why?" The past few months I have been hearing a slight knocking/ticking noise coming from my transmission. When I press in on...
  5. Transmission - Rearend
    Ok. I bought an 1980 el camino with a 350 and 350 tranny not running. When i got it it had a flat tire, pumped the tire up and the car started rolling!!! First thing i did was check the linkage on the tranny and of course it was disconnected, bolt was missing so i bought a new bolt and put it...
  6. Transmission - Rearend
    hey i have a 72 skylark and not a fan of the 350 in it and already have a juicy chevy 350 to put in. motor mounts are ant a problem but the tranny is where i need a little help. i read on here somewhere that you can get an adapotor for the chev 350 to the stock buick tranny? is this true or am i...
  7. Transmission - Rearend
    I have a th350 rebuilt with TCI "pro super kit" about 5 yrs ago behind a 406 sbc w/3500 stall and 4.33 in a 2900 lb 40 ford 2dr sedan that I use for street/strip untill my last trip to the strip. First time trial run car launched hard as usual, shifted great and ran right on the number. Second...
  8. Hotrodding Basics
    I am just starting to work on a 1937 Chevy 1/2 ton truck. I was wondering if anyone had a recommendation for what engine and tranny I should use. If you have a recommendation please let me know. It is still a little ways away until I get the the engine and tranny, but I thought I would start...
  9. Transmission - Rearend
    I have a 95 Nissan Pathfinder VG30E engine and am tying to do an engine swap , but problem is, I for the life-of-me can't get the torque converter back in the tranny far enough! Any tricks would be appreciated!:welcome:
  10. Tranny

    Monster Motorsports TH400...supposed to hold up to 950hp...We'll see
1-11 of 11 Results
Top