Hot Rod Forum banner
transmission
1-20 of 75 Results
  1. Transmission - Rearend
    Hi there, im in the midst of planning out a 572 stroker hemi build (based off the 426 hemi) to throw in my 1962 plymouth belvedere and im trying to find a transmission thatd work. I have a push button auto and would like to keep it so no fully manual trannys. it's going to be a street cruiser...
  2. Transmission - Rearend
    Little bit of context: I have a 1962 Plymouth belvedere that i was thinking of giving the hemi treatment, specifically the 426 hemi. In my research for new parts i came accross jims auto parts who's selling a block thats bored to 4.50" instead of the stock 4.25", if i coupled that with a...
  3. Transmission - Rearend
    Hello, I've been doing research into a project I have. My 1975 Chevy nova currently has a 3 speed column shift and i would like to change it to a 5 speed without cutting a hole in the floor for a shifter. I already found a transmission that would potentially work (its a super street richmond 5...
  4. Hotrodding Basics
    Hello all, It looks like my transmission is on its last leg here and taking its sweet time shifting into a higher gear+only at high RPMs. A rebuild is mandatory, but I've gotten a decent run from it after it was recycled from my old 327 SBC. I figured, while I had the tranny out for rebuild...
  5. Hotrodding Basics
    Hi All, :welcome: Quick question: when I put the transmission into drive and take my foot off the brake pedal, the truck never moves forward under its own power. It takes a bit of pressing the accelerator pedal to get it going, but I assume that's just because it is a big heavy vehicle. Is...
  6. Transmission - Rearend
    I have a '85 K5 that came with a 305 and a 700r4 with 4x4. I recently picked up a 350 from a '94 blazer/suburban/Yukon, etc. (Dont know which exactly, got that from the casting numbers). The new 94 engine came with a TBI, instead of the 4bbl I have on the 305, so it has a pcm. I want to keep...
  7. Transmission - Rearend
    Good Morning all, It's been a while since I've posted here, but this issue is throwing me a curve ball. I rebuilt my TH400 a little over a year ago with the upgraded clutches and steels. I also dual-fed the direct drum by removing the second teflon seal and plugging the main feed hole right of...
  8. Transmission - Rearend
    Okay So I have this 2001 chrysler LHS v6. When I was driving I was on my way to an auto parts store and there parking lot has a really steep dip before going into it. So I turn my wheel and try to slowly pull into the parking lot. When I get to the dip and it is time for my car to climb the dip...
  9. Transmission - Rearend
    Hello All, I am working on installing an TH400 into an 89 Chevy Silverado that previously had the 4 speed transmission (TH700) with the TV cable. Where is the best place to install the vaccuum line for the modulator and is the wiring there for the down shift relay? Any help on this would be...
  10. Transmission - Rearend
    Hi All, About a year ago I asked for some help regarding the 4L60e in my '94 Chevy 1500. I have been having issues with getting it to shift into 4th. At times, it prefers to bog between 3rd and 4th. I replaced the TPS, along with the temperature sensors and they seemed to have helped the...
  11. Transmission - Rearend
    Hello, 2 months ago i did a swap my 91 caprice's engine to ls1 . my transmission was a 700R4 and i had difficulties fabricating the TV cable but finally did it. last week in my way to home in the highway the third gear went off, i was cruising at 120km/h at normal rpm. So i need an advise in...
  12. Transmission - Rearend
    I have a 1970 Pontiac Lemans and a am trying to convert it to Muncie 4 speed. I have been searching for the clutch linkage and am wondering if I could use a Chevy Muncie 4 speed clutch linkage kit? Is there interference somewhere that would not allow this kit to work? I have found found this...
  13. Hotrodding Basics
    Hello, I just bought a 1958 GMC 100 about as stock as you can think. I want to leave the interior and exterior totally original (rat rod vibe) but I want to put a 383 stroker with 465hp under the hood with a manual transmission. As I said everything is stock, and I'd like to be under about 7000...
  14. Transmission - Rearend
    I own a 70 Pontiac Lemans and just build a new 350 for it, I know I shouldnt have wasted the money on the 350 but nevertheless I now need to rebuild a tranny for it. I have two th350s, one that doesnt go inreverse which is in the car and the other is one I got off of craigslist. I was thinking...
  15. Transmission - Rearend
    I'm looking for a 6-speed transmission for my 69 Camaro and I still plan on using the center console. It originally had an automatic transmission and a small block 327. I've been looking at T-56's for a couple months now. I'm putting a 498 big block engine in whenever I can finish it off. Is...
  16. Hotrodding Basics
    Is it possible to crack trans cooler inside of radiator yet not contaminate coolant that IS responsible for the cooling of motor oil in the radiator????? ^^^^MAIN QUESTION^^^^^^^^ ------DETAILS BELOW------ IM AS DESPERATE AS THE NEXT MAN and you fella's have been good to me!!! So the milky...
  17. Transmission - Rearend
    I exchanged all my fluid in my 4L60E by removing the return hose off the transmission cooler and adding fluid down the dipstick at the same time while the engine is running. It was always within half a quart plus/minus so I don't think there was any problem there. My question is, a friend said...
  18. Transmission - Rearend
    Transmission has been taking longer and longer between shifts, but shifting into high gear...came home, parked it for 30 minutes and when I went back down the road, it wouldn't shift out of low gear. I changed the fluid and filter, but they were good. Any ideas?
  19. Transmission - Rearend
    I have a 1969 Ranchero with an FMX transmission in it. It was working fine and then the next day I come out and the gears are reversed. Park is still park. Reverse and neutral are drive. Drive is now reverse. I already adjusted the linkage to be correct and still the same issue. Thinking it...
  20. Transmission - Rearend
    Hi all, greetings from Tasmania, Au. I have a 4L60 box - V6 GM combo fitted to Toyota Hilux, not long bought. The problem I have is when going down hill at any speed and take my foot off the trottle it does not change down gears, neither it will change manually. As a result, the car free wheel...
1-20 of 75 Results
Top