Hot Rod Forum banner
upgrade
1-7 of 7 Results
  1. Hotrodding Basics
    Going to help kid look at a 93 Z28 LT1 ....I talk to owner of car He said it has Aluminum heads... The kid is looking to build motor up... What I lookup the Alum. heads could be # 10128374 or 5245 or 649... And that its a reverse water flow motor correct? These heads any good or needs change to...
  2. Engine
    This summer I'll be converting my small block chevy to a roller cam like I decided in a previous thread http://www.hotrodders.com/forum/roller-rockers-need-guide-plates-495026.html. I was recommended the XR270HR by Comp Cams, and by Lunati I was recommended the VooDoo 20120710 XR270HR...
  3. Murph

    started 6 yrs ago and now working on the engine to upgrade a little
  4. Murph

    started 6 yrs ago and now working on the engine to upgrade a little
  5. Murph

    started 6 yrs ago and now working on the engine to upgrade a little
  6. Engine
    Hello, I am new and am looking for good advice. I have a 1976 Chevy Nova with a stock 305 2 barrel 308 rear end. Its an old car from High school I have had setting in my shed. I have been in the process of body work. She has 101,000 miles all stock. With two children I am on a budget. I want to...
  7. Hotrodding Basics
    I have a 1972 chevrolet 3/4 ton pickup truck with a 350 engine. On it is a Rochester Quadrajet 4mv carburetor. It is missing the vacuum break diaphragm plunger, and is rigged with a wire to keep the choke open so that the truck is able to start. Winter is on its way and the cold weather makes...
1-7 of 7 Results
Top