Hot Rod Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 7 Results
  1. Hotrodding Basics
    Hey there fellow hotrodders. I'm having an issue with my classic c20. It likes to get hot. But not fast. Usually takes a quite a bit of driving before it heats up. Little back story. My GPA and I built it over 15 years he recently passed and I got truck. Since I've gotten it I put a...
  2. Engine
    I recently replaced my water pump because the old one was squealing and knocking really bad. The new cheap one I got did the same thing, I only temporarily fixed it by squirting wd40 up the weep hole. I've been running it like that for a little while with minimal noise from it. As I was driving...
  3. Hotrodding Basics
    I have a 66 mustang coupe with a 347 stroker. I used a FlowKooler water pump. Twice the inner back plate gasket blew out. I wanted to know if anyone has had the same problem. The company says they have not heard of this. I don't want to use this anymore. Looking for a different high flow pump.
  4. Engine
    Hello, i have a 1986 chevy K10 that squeals a lot when i start her up. i think that its related to the belt that goes from the crank to the water pump to the alternator. there is only about 1/4 of the water pump pully touching the belt. could this be that reason for the squeal? the first...
  5. bypass1

    45° bypass fitting.
  6. bypass2

    45° bypass fitting.
  7. bypass3

    45° bypass fitting.
1-7 of 7 Results