Hot Rod Forum banner

xe284

  1. SBC Build

    Hotrodding Basics
    I am in the process of doing a SBC build. I have a 350 bored over .30, I went with a 2 valve relief float speed pro piston which put me at 10 to 1 compression with a 64 CC head, I have a set of modified Vortec heads ( the guides have beencut and I have a new springs that hold up to 575 lift, new...
  2. Sbc build

    Hotrodding Basics
    I am in the process of doing a SBC build. I have a 350 bored over .30, I went with a 2 valve relief float speed pro piston which put me at 10 to 1 compression with a 64 CC head, I have a set of modified Vortec heads ( the guides have been cut and I have a new springs that hold up to 575 lift...
  3. Cam Selection 292h or XE284 .

    Hotrodding Basics
    I am in the process of doing a SBC build it's a Chevrolet 350 bored over .30, I have 2 valve relief Speed Pro pistons which puts me at 10 to 1 compression as far as my cylinder heads go I have a set a vortecs with screw in studs ,new guide plates, and also new springs that can handle up to 550...
Top