Hot Rod Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter #1
If I am replacing pressure plate, clutch disc, and throw out bearing and still using the stock flywheel, can I go to a 11 inch setup with NO problem.
 

·
Administrator
Joined
·
9,803 Posts
davids2toys said:
If I am replacing pressure plate, clutch disc, and throw out bearing and still using the stock flywheel, can I go to a 11 inch setup with NO problem.

======== is your flywheel drilled for the larger bolt pattern of the 11" pressure plate?
 

·
Registered
Joined
·
12 Posts
Discussion Starter #3
There is just one set of holes for the pressure plate, but it also has numerous hole that go halfway thru and have no threads
 

·
Administrator
Joined
·
18,432 Posts
You probably have the smaller flywheel...........You will need the 11 in flywheel for the 11 in clutch assembly.

Will also need a different starter nose housing.
 
1 - 4 of 4 Posts
Top