Hot Rod Forum banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
High Performance Rear Ends
Joined
·
3,782 Posts
The pinion snubber on these cars is only there to keep the rear end from hitting the floor on hard bumps. It's not use the way Chrysler used a pinion snubber to controll axle wind up. GM cars use slapper type traction bars or Cal Trax bars to accomplish this and it works better than the pinion snubber.
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top