Hot Rod Forum banner

1 - 3 of 3 Posts

·
Administrator
Joined
·
9,861 Posts
Discussion Starter #1
Wondering if any person here has used these tail lights recently? Quality questions. I see metal housings, & plastic housings. I likely would use a metal housing design.

Also I see 2 wire and 3 wire types offered. Seems the ground wire is omitted in 2 wire units

A small project, may use the 1939 Ford Tail light because it will fit the location nicely

I see many repro units offered. Probably only 1 - 3 companys manufacture them
 

·
Registered
Joined
·
9,050 Posts
Wondering if any person here has used these tail lights recently? Quality questions. I see metal housings, & plastic housings. I likely would use a metal housing design.

Also I see 2 wire and 3 wire types offered. Seems the ground wire is omitted in 2 wire units

A small project, may use the 1939 Ford Tail light because it will fit the location nicely

I see many repro units offered. Probably only 1 - 3 companys manufacture them

Recently, how about five years ago.. Cheap die-castings, not really as large as the real thing. Looked/worked ok on the car (36 Hudson) but Michigan weather did in the shiny chrome? surface in three seasons.
 
1 - 3 of 3 Posts
Top