[gearhead67]

Hey, my name is Ron, I'm 40 years old, live in central Illinois, GM to the bone, current project is a 1950 Chevrolet Fleetline, California car, 100% bone stock, 32,463 original miles. I have been an S-10 and G-body nut for the last 20 years. I am currently thinking about lengthening an S-10 frame since the 50 is 115" and the S-10 is 108.7", by my guesstimates the fram configuration is about the same, any hints?

 

[poncho62]

welcome....Probably best to ask in the General Rodding forum..........

Apparently, the s10 is popular swap for the AD Chevy trucks of those years...not so sure about the cars.

 

[Henry Highrise]

Welcome to the Hotrodders Bulletin Board. Lots of opinions, advice, and info here, so just join in and enjoy the site. :welcome:

 

[THX_138]

Welcome Ron...

:welcome:

your best and easiest bet would be to undo the rear spring perches on your frame and just alter the wheelbase there by moving them back some.

 

[matt167]

the stock frame, will do you best. V8 will bolt in, or a MII kit can be used. a stock Camero rear from the 70's, will fit right in, with stock springs.