Hot Rod Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hey guys, i own a 1971 chevy 1/2 ton 2wd c/10. The problem is i am an offroad enthusiast and i cannot find lift kits or part for my year truck anywhere! If you guys have any information or know how to lift it some other way PLEASE HELP ME! my email is [email protected] Thanks...

-Dave
 

·
Registered
Joined
·
175 Posts
hey

Call suppliers like SkyLift, tough country or some of the other big names in ******* gear.

i have seen them somewhere but cant recall offhand.

or you could of course just sell me your truck so i can hotrod it:p

r4r
 

·
Premium Member
Joined
·
2,233 Posts

·
Too many hobbies!
Joined
·
239 Posts
cheapskate

I did my own lift on my 70 K10.
On the front, by removing all the leaves, but the main, and adding shortened rear leafs, for the arch.
On the back, I did it cheap and cheesy, by adding 2" blocks, and a couple extra long leaves.
I didn't go up enough to adversly affect the pinion, or driveline angles, so I didn't even bother getting pinion angle shims.
It wasn't a monster truck with 44's kind of lift, but I had plenty of room to get in a bad twist without rubbing my L78 grip spurs.

How much are you wanting to go up?
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top