Hot Rod Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hello everyone so my uncles truck lost 3rd gear. We bought a used transmission that was recently rebuilt(got from a friend) after putting it in the truck and driving it around it kinda had 3rd gear. Then after a month or so it went out again. I removed the transmission and disassembled it. Everything looked good internally. There was evidence of the clutches starting to slip. I rebuilt the transmission and reinstalled it. Drove around the block and still don't have 3rd gear. A friend of my uncles had a nicer scanner to check out the solenoids and such we found when in first gear it says 3rd gear is on but in 3rd gear no pressure to engage 3rd before I tear down the transmission again was wondering if any of you more experienced fellas could help me out
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top