Hot Rod Forum banner
1 - 4 of 4 Posts

55 Posts
Valve Clearance

runn141 said:
does anyone know if 2.05 1.60 valve heads will fit and clear on a 350 or will it have to be a 4.125 bore?
Used all the time on 350, of course enough clearance depends on a few things like what cam, pistons, etc,etc

Also keep in mind most aftermarket heads like Dart usually use longer valves/pushrods.

Chris Laarman
Ottawa Engine and Performance
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.