Hot Rod Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
100 Posts
Discussion Starter · #1 · (Edited)
200 4R Torque Coverter Lock Up Circuit

I proof read this write up a number of times, but I just saw that I had some wrong pin numbers on the TDR. Pin 5 should be pin 12, and pin 4 should be pin 8. I will correct the document and reload it. If any of the monitors read this, please pull this post until I get the correct write up posted.

I am sorry about the error.

Attached is a write up, and schematic on how I delayed my lock up. I am posting this responce because there has been some recent threads on this subject. Using this delay cercuit has worked great on my 37 Ford with a SBC and 200 4R tranny. Listed below are the links for the Relay and TCI Kit.

http://catalog.idec.com/productserver/publish/usaf/datasheet.asp?PN=GT5Y-4SN6D12&FAM

http://www.summitracing.com/parts/TCI-376600/
 

Attachments

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top