Hot Rod Forum banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Administrator
Joined
·
10,153 Posts
the rear of the 4l60e case is open in a 4x4 application. The t-case is sealed at the front.


Often these adapters become warped and not flat where the gasket needs to seal. You can unbolt the adapter from t he back of the 4l60e trans. Flat sand that area on something large enough to bring the surface back to level.

A square cut O-ring seals up the t-case adapter to the 4l60e case
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top