Hot Rod Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I have and old '63 Impala that has been in my family for years and the motor has gone kaput. It has the original 283 and powerglide and years of unleaded fuel and leaky seals has done a number on it. I really like the motor b/c it revs high and I want to rebuild it. I would however like to get more power out of it. I can't have every honda that pulls up beside me blow my doors off. I already know that I am going to have to bore the block 0.030" over and a friend suggested i put a stroker crank in it with new heads. Do you have any guidence?
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top