Hot Rod Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
318 Posts
I curently run a 270 horse 283 with a 4 spd in my 28 coupe and I have no problem with the frame. Before I put the motor in I boxed the frame rails on both sides front to rear w/1/8 in plate. I also installed a removablle cross member with the 4 speed which strengths the rails a lot.

So to sum it up YES the rails will take 300 HP plus.

Jerry:)
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top