Hot Rod Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
149 Posts
Discussion Starter #1
i have an early 283 in a truck. i have the heads off already and i have some empty 305 heads(no valves).

will the valves go in the 305 heads?
and will they work on the engine?

it has flat top pistons with 4 valve relief.
 

·
wind & fire = guides to power
Joined
·
1,529 Posts
the 305 heads are probably 1.86 or 1.94 intake valves. The 283 is probably equiped with smaller 1.74s?.

You can bring your casting #s and that would really really help...but a short answer is: The heads will work but the valves(9/10) will not swap.
 
1 - 3 of 3 Posts
Top