Hot Rod Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
145 Posts
Discussion Starter · #1 ·
can anyone tell me why someone would run a 350 head gasket on a 305? My first thought was to lower compression, and I never heared it run. I have used a set of 350 heads on a 305 and it ran good,still running. The heads are 14022801 1.85/1.5 valves / 58 cc More info is that they came off of a 1980 - to I think 1986 305. Does anyone know what the comp.ratio would be if ,[and does], have dished pistons,no valve reliefs.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top