Hot Rod Forum banner
1 - 4 of 4 Posts

·
Not Considered a Senior Member
Joined
·
10,722 Posts
Remove the intake and the valve covers. Back off all the rocker arms until the rocker can be moved and the push rods removed. Remove the roller tappets (87 307`s had roller tappets) Remove the timing chain cover, remove the timing gear, remove the cam retainer plate, cam slides out.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top