[ceelrod]

Hello, Ive been building a 33 plymouth for the past 2 months and its going great other then i cant find any companies out there to get polished int. and ext. door handles .Ivge tried
TRenz, Billet splecialties, Ply-do,just ahvent had any luck finding them. any help, for a company that i could get them from would be great.
Thanks

[ February 20, 2003: Message edited by: ceelrod ]</p>

 

[meanmachine666]

try these folk: http://www.frontiernet.net/~jdeatsch/outside.htm


[ December 31, 2002: Message edited by: meanmachine666 ]

[ December 31, 2002: Message edited by: meanmachine666 ]</p>

 

[HotRodMan]

There is a web site that specializes in building a 33 street rod that you would enjoy. Go to project33.com

 

[ceelrod]

Thanks for the help ill check it out . I found a company for the int. handles . Now i need the exterior handles still.

 

[pasadenahotrod]

If you are at a point where it is necessary to have outside handles just buy 33-34 Ford Closed car Door handles. They'll bolt right up where your originals were and look right at home. Some day you may find some "gennies" but until then ....

 

[awsum34]

Every now and then check ebay

 

[ceelrod]

THanks for all the help. I ordered the 34 ford door handles from speedway customs . the should be here soon !!!!! Thanks Loads !!!!!!!!!
Chuck