Hot Rod Forum banner
1 - 3 of 2 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
I am in the process of building a 1934 ford. The chassis and all engine etc is together. I have the body fitted and bolted up tothe front fenders. My question is, does anyone have experience with the inner fenders supplied with an outlaw performance body? I have tried every angle, position I could put these in and they just don't fit. I am stuck. If you have constructed an outlaw product you know first hand that this car comes with no directions. They give tech support but it is poor. I am not a professional restorer but I do have a lot of motor building experience. I would appreciate any help, pictures etc showing how these work.
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #3 ·
Thank you,

I have an independent front suspension. That is the problem. Also, the inner fender does not match the contour of the fender at all and the built in flare hits the shorty exhaust headers on both sides. Did this happen on your friends car?

Ted
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #5 ·
fastford

thank you the information was very helpful. My friend and I will try to fit this on wednesday night. I will let you know if we are successful.

Ted
 
1 - 3 of 2 Posts
Top