Hot Rod Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1
I have a 1974 351c 4-V & a 1972 351 2-V
I would like to know if the cam, lifters and the crank from the 2-V will fit the 4-V engine. The 2-V engine has been rebuilt but
swallowed a valve. the 74 has 1050K on it.
w12bill3[email protected]
 

·
Registered
Joined
·
4 Posts
Is the 2v a Cleveland engine? If so then it would be no problem. The cam profile may be a little different between the two however you would be hard pressed to tell the difference in your application.

FYI 400 Ford parts will interchange. Basically it is a factory stroked 351C.
 
1 - 2 of 2 Posts
Top