Hot Rod Forum banner
1 - 9 of 9 Posts

·
http://www.backfalt.fi/indexse
Joined
·
263 Posts
Discussion Starter · #1 ·
Engine is a 350 4 bolt .060 over TRW pistons Eagle cast crank and rods 6.125"
CR 10.9
compcams solid roller 12-773-8 050 in 254 ex 260
intake is a super victor
heads AFR 65cc 210cc S.E

is a 850cmf dp to small?
 

·
Registered
Joined
·
12,338 Posts
Also noticed thats not a very big cam for a super victor. again ,depends on application? I use a victor jr with similar cam and 950,on a 434. My engine makes peak power at 6500
 

·
Registered
Joined
·
744 Posts
I would go with the Pro-System, what ever they reccomend if you have the money. I got one for my 383 and it was about perfect out of the box, just needed an idle adjustment.

I sure wish I had enough engine for the SV1 :drool:
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top