Hot Rod Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1
I'm lookin for a front windshield garnish and interior/exterior center post. Also would like to find a hood in the S. Texas area, I don't want to cut up the one I've to clear the blower. Any other miscellaneous parts and pieces I might need for my resto rod.
 

·
Registered
Joined
·
1,189 Posts
Several years ago the center outer stainless windshield moulding and the inner were available NEW. Try Drake in Oregon or Vintique in CA.

Just so you'll know the term "resto-rod" means a rod which looks like a stocker from the outside (exception being wheels) and has a modern drivetrain and/or interior with A/C etc. It does not apply to a ****** car with a blower and 2 4bbls. sticking through a hole in the hood.
 

·
Registered
Joined
·
7 Posts
Discussion Starter #4
Well, the way I look at it! If you can have alternative wheels on a resto-rod then I can use the stock look wheels w/original caps and beauty rims and that will offset the hole through the hood!!
whatta ya think?
 
1 - 4 of 4 Posts
Top