Hot Rod Forum banner
1 - 1 of 1 Posts

·
The kid is the man.
Joined
·
59 Posts
Discussion Starter · #1 ·
Hey guys,
I have a 51 Chevy Styleline Deluxe that is in stock form. 216, 3 on the tree manual and the torque tube rear.

I am planning on doing the whole open driveline swap and have some questions.

I want to use a 250 or 292 straight six motor with an S10 T5 tranny. probably a 2nd gen camero/nova rear.

Will that motor bolt up to the T5? Will I be able to use my stock clutch pedal? If not, what do I do? I have a custom dual res master cyl that uses the stock master cyl hollowed out that I prefer not to change, I dont think that matters, but just to give complete info, im throwing it out there. It is on the stock trans crossmember.

Thanks guys.

 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top