Hot Rod Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
99 Posts
Discussion Starter #1
I recently came across either a post or maybe when I was looking though the project journals a few photos and comments from someone upgrading their dash in a 56 Chev sedan . Photos showed how you were cutting the dash bezel to fit the new gauges .... 4 " I believe.

I cannot find the topic again . If this rings a bell with anyone please come forward
I am very interested in doing the same with mine

Brian
 

·
Registered
Joined
·
99 Posts
Discussion Starter #3
I'm thinking of taking everything out of the cluster and making up a backing plate,chrome it and install the Autometer "Lunar" speedo and tach in the original bezel .The Lunar set needs 3\38 hole to mount and not sure what the finish size is which includes the outter ring. So would probably need to trim some stock from the inner opening of the bezel.

Like the attached crude rendering

Don't giggle ...I don't claim to good at anything
 

Attachments

1 - 3 of 3 Posts
Top