Hot Rod Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I have a 56 chevy wagon already has a nova or Camaro front clip attached, I bought a 96 corvette rearend and transmission. I am getting ready to do the swap looks like the old rear end was 60" and the corvette is also 60".
I have never seen it done but we are getting ready to weld brackets for the torsion bar, 4 link, sway bar, and shock mounts. Has anyone had any experience doing this? It is going to be different in that we are going from a unibody to the original frame. Am I crazy it seems like it should work, I know its radical for a wagon but it will be totally custom and one of kind.
Any rodders have any advice? :welcome:
 

·
Administrator
Joined
·
10,190 Posts
Welcome to Hotrodders

I moved this thread to suspension forum. Not many members read the introduction forum since it is for non-tech items
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top