Hot Rod Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
994 Posts
You will need the spindles to match the hubs, as well as 64-67 Nova steering arms. If you don't use 64-67 Nova spindles you will need to adapt the lower ball joint to the non-Nova spindle. The steering stop on the 62-63 lower arms will be too long and in the wrong place.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top