Hot Rod Forum banner

66 continental engine swap

3911 Views 1 Reply 2 Participants Last post by  farna
I have some questions regarding engine swaps on my 66 lincoln continental...Basically i want to do a modern motor like mustang 5.0, 4.6 or 5.4 ford trunk motor...any other suggestions of motors that may work? not looking for a huge performance motor but something that can get up and go similar to the stock 462 motor and fuel injected...thanks for any help!
1 - 2 of 2 Posts
Go with the 5.4L truck motor then. You need torque to move that land barge, and a largish truck motor will be optimized for torque. Should move it as good as the big old motor and get better mileage to boot. Should perform about the same as the late model truck (both power and mileage wise) the motor came from.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.