Hot Rod Forum banner
Status
Not open for further replies.
1 - 3 of 3 Posts

· Registered
Joined
·
10 Posts
Discussion Starter · #1 ·
Could anyonr please hell me by telling me what I would need to do to replace turbo 375 leaking piece of junk with 700r4. I run four link in bach with 9 inch so I have room to move if the tranny is longer or shorter. lokar shift is 350 could i reuse it on 700r4. electric speed o meter . would I need to move tranny mount. any help would be great thanks
 

· Registered
Joined
·
6,204 Posts
32 roadster said:
Could anyonr please hell me by telling me what I would need to do to replace turbo 375 leaking piece of junk with 700r4. I run four link in bach with 9 inch so I have room to move if the tranny is longer or shorter. lokar shift is 350 could i reuse it on 700r4. electric speed o meter . would I need to move tranny mount. any help would be great thanks
What length is the Tailhousing on the TH375, 9"? If so the 700R4 is the same length.
Shifter may work but, you wouldn't be able to manually shift to 1st gear.
Trans dimensions:
http://www.maliburacing.com/auto_tranny_id.htm
http://www.tciauto.com/tc/trans-dim
 

· Registered
Joined
·
12 Posts
a place for information

i my self dont know much but i found a place that will have alll the answers for your questions,,,A and Reds transmissions in Wichita kansas phone number is 800 835 1007....i jus replaced a turbo 350 with a 700r4 they even figured out exactly what gears i needed in the700r4 ... told me about the flywheel and the mount ....was a very helpful companythere email is [email protected]... what got me is the prices if your a shop as i am ....igot all the gears housing and information for $19.80 that was a big help .....good luck... don ...aka majic1on1
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top