Hot Rod Forum banner
1 - 5 of 5 Posts

·
Short bed 70 Chev
Joined
·
76 Posts
Discussion Starter · #1 ·
Will my 700r4 in my chevy c10 hold up?
sbc 355 stock crank 9.1 c/r with aluminum heads.Combustion Chamber: 64cc
Intake Runner: 190cc
Intake Valve: 2.02"
Exhaust Valve: 1.60
a lunait hydralic cam 276 duration 504 lift 2200-6400 range and 1.6 rockers
1 7/8 tube headers wit 2.5 collector and a demond 750 cfm carb. Thanks for your time.
 

·
Administrator
Joined
·
10,126 Posts
a well built 700r4 / 4L60 trans will have not problems with that mild engine.

The carb is too large CFM though.
 

·
Short bed 70 Chev
Joined
·
76 Posts
Discussion Starter · #4 ·
Carb

Crosley said:
a well built 700r4 / 4L60 trans will have not problems with that mild engine.

The carb is too large CFM though.
The carb is to large but for the price $50 i couldn't pass it up leaves me room for growth i am actual planning on putting on a weiand 177 blower come spring then it might be on the small side.
 

·
Administrator
Joined
·
10,126 Posts
70CHEVYSHORTY said:
The carb is to large but for the price $50 i couldn't pass it up leaves me room for growth i am actual planning on putting on a weiand 177 blower come spring then it might be on the small side.

with that small blower the carb would be OK
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top