Hot Rod Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
I'm trying to install a set of racing seats into my '84 camaro. the mounts that came on the seat do not match the floorboard of the car, so i planned to take the seat rails off the original seat, and install them on the new racing seats, but that wont work. however, i figured i could just remove the seat mounting bracket from the seat rail, and put that on the rails that came with the racing seats, but the mounts are held on with some kind of rivet or pin, and i'm curious to know if anybody knows how to remove without destroying them, or maybe just an idea of how to make it work. i don't want to ruin the stock seat just incase the racing seats end up not working.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top